Fumigation-free wooden pallet manufacturers say that the raw material of wooden pallets is composite board or plywood. The raw material of the wooden pallet custom material is made of various wood residues after high temperature and high pressure disinfection. They are non-original wood packaging materials and comply with the relevant new regulations. Fumigation-free wooden pallets are made of composite panels or plywood, which generally meet the entry and environmental protection requirements of countries around the world, and can be directly cleared in the importing country without any procedures.

Non-fumigation wooden pallet manufacturers will summarize the characteristics of non-fumigation wooden pallets as follows:

1. Export fumigation-free, disinfection-free, visa-free, convenient entry and exit;

2. Good waterproof performance, simple production process and low cost;

3. It can replace wooden pallets with strong adaptability.

4. Compared with ordinary wooden pallets, the product has beautiful appearance, strong compression resistance and high carrying performance;

5. It can effectively avoid the shortcomings of traditional wooden pallets, such as knotting, insects, color difference, and high humidity.

For the current logistics enterprises, it is convenient to fumigate wooden pallets. It is the carrier of static goods into dynamic goods, and it is a tool that can be used in the process of loading and unloading, storage and transportation. With the use of forklifts, the utilization rate of the warehouse can be greatly improved. Consistent transportation of pallets can greatly reduce costs. The use of wooden pallets was initially in the field of loading and unloading. Now, fumigation-free wooden pallets are uniformly packaged and stored. Pallet unit handling and pallet unit transportation can be seen everywhere, and quickly spread from the logistics industry to various industries. Small fumigation-free wooden pallets have exerted great power, and small pallets reveal a large "market".

The manufacturer of non-fumigation wooden pallets said that there are two test specifications for the strength of non-fumigation wooden pallets: one is the bending strength test, and the other is the drop test. Today, I will test a detailed experimental method for everyone: place the flat pallet on the lower bearing beam, align the inner side of the longitudinal beam of the bangyi wooden pallet with the two inner sides of the lower bearing beam, and the distance between the two inner sides of the lower bearing beam is the bearing distance. The supported lower bolster beam is a rectangular empty box formed by butt welding of two 10# channel steel, and its length should be slightly greater than the length of the pallet. Then, place two bolster beams (upper bolster) for loading on the flange of the drill bit, with 1/4 support distances on each side of the centerline of the pallet panel. The two upper bolsters used for loading are made of seamless steel pipes with an outer diameter of 76mm and a wall thickness of 6mm, and their length should be slightly longer than the length of the pallet. The bending strength test of the pallet can be stopped with a 3-5 ton compaction tester. Other measuring instruments include dial indicators, moisture meters, steel tape measures, plumb bobs, etc. In the experiment, the pallet is placed on the compaction tester, and the concentrated load is applied to the upper bolster through the pressure plate at a loading speed of 10 kg/s. When the load reaches 1.5 times of the wooden pallet, measure the deflection of the middle part of the lower pallet of the pallet.